Buttons
GRN-ABS-G110
General-purpose ABS
- Tensile strengthISO 527-1/-2
- 40–50 MPa
- Charpy notched impact strengthISO 179-1/1eA · 23 °C
- 15–25 kJ/m²
Products
GREENPOLYMER focuses on polymer material applications, supplying engineering plastics such as ABS, PC/ABS, flame-retardant and recycled materials, as well as 3D printing materials. We start from the part's function, performance targets and processing conditions, and help you choose and validate the material.
Engineering plastic compounds
Example grade / typical values — to be corrected by GREENPOLYMER
01 / 11
ABS engineering plastic for housings and structural parts.
- ABS compounds
- PC/ABS compounds
- Flame-retardant compounds
- Recycled compounds
- PC compounds
- PA6 / PA66 compounds
- PBT compounds
- mPPE compounds
- PP compounds
- ASA and PC/ASA compounds
- POM compounds
Buttons
GRN-ABS-G110
General-purpose ABS
- Tensile strengthISO 527-1/-2
- 40–50 MPa
- Charpy notched impact strengthISO 179-1/1eA · 23 °C
- 15–25 kJ/m²
ABS engineering plastic for housings and structural parts.
Mid-frames
GRN-PCA-T310
Heat-resistant PC/ABS
- Tensile strengthISO 527-1/-2
- 50–60 MPa
- Charpy notched impact strengthISO 179-1/1eA · 23 °C
- 35–55 kJ/m²
PC/ABS engineering plastic balancing heat resistance, impact and appearance.
Charger housings
GRN-PCA-N510
Halogen-free flame-retardant PC/ABS
- Tensile strengthISO 527-1/-2
- 55–65 MPa
- Flammability ratingUL 94 · 1.5 mm; design target, subject to test report
- V-0
For parts with flame-retardancy requirements. Each grade's rating is confirmed by its test report.
Pellets
PCR
Each grade can be supplied as a version with post-consumer recycled (PCR) content on request, marked with the -R suffix.
Lamp covers
GRN-PC-L110
Transparent PC
- Tensile strengthISO 527-1/-2
- 60–68 MPa
- Light transmittanceISO 13468-1 · 3 mm; design target
- ≥ 88 %
Halogen-free flame-retardant, silicone-based flame-retardant and transparent PC grades.
Drone arms
GRN-PA6-C310
Carbon-fiber-reinforced PA6 (CFRPA)
- Tensile strengthISO 527-1/-2 · dry
- 180–250 MPa
- Flexural modulusISO 178
- 13–20 GPa
Glass- and carbon-fiber-reinforced PA6 and PA66 grades, with and without flame retardancy.
Connectors
GRN-PBT-E510
Flame-retardant glass-fiber-reinforced PBT (high CTI)
- Tensile strengthISO 527-1/-2
- 100–130 MPa
- Comparative tracking index (CTI)IEC 60112 · design target
- ≥ 600 V
Flame-retardant glass-fiber-reinforced PBT for electrical insulation and tracking resistance.
Battery module brackets
GRN-PPE-N510
Halogen-free flame-retardant mPPE
- Tensile strengthISO 527-1/-2
- 50–65 MPa
- Flammability ratingUL 94 · 1.5 mm; design target, subject to test report
- V-0
Halogen-free flame-retardant mPPE: low density, dimensionally stable, hydrolysis resistant.
Fan parts
GRN-PP-E510
Flame-retardant glass-fiber-reinforced PP
- Tensile strengthISO 527-1/-2
- 50–70 MPa
- Flammability ratingUL 94 · 1.5 mm; design target, subject to test report
- V-0
Halogen-free flame-retardant PP and flame-retardant glass-fiber-reinforced PP.
Outdoor housings
GRN-ASA-W110
Weather-resistant ASA
- Tensile strengthISO 527-1/-2
- 40–50 MPa
- Weathering (color difference)ISO 4892-2 · Xenon-arc 1000 h; design target
- ΔE ≤ 3
Weather-resistant ASA and PC/ASA for outdoor cosmetic parts.
Gears
GRN-POM-G110
General-purpose copolymer POM
- Tensile strengthISO 527-1/-2
- 60–68 MPa
- Flexural modulusISO 178
- 2.4–2.9 GPa
General-purpose POM: wear resistant, self-lubricating, dimensionally stable.
3D printing materials
- Appearance8 products PLA filaments where color, gloss and surface texture matter most.
- Everyday Functional7 products Easy-to-print materials for everyday functional parts, with better toughness, heat resistance or speed.
- Engineering13 products Engineering materials with higher heat resistance, strength and stiffness, including fiber-reinforced grades.
- Flexible4 products TPU in several Shore hardness grades.
- Support5 products Soluble and breakaway support materials.
- Photopolymer resin2 products Photopolymer resins are listed separately from the five filament groups.
Browse by material
Browse by application
Materials selected for part structure and operating conditions, covering requirements such as appearance, toughness, heat resistance, flame retardancy and recycled content. See each grade's data sheet and test report for its properties.
FDM filament in five groups (Appearance, Everyday Functional, Engineering, Flexible, Support) covering PLA, PETG, ABS, ASA, TPU, PC, PA and fiber-reinforced materials, plus photopolymer resins. PPS, PEEK and PEKK filaments are planned.
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.