Typical values. Refer to the actual TDS.
| Compare | Model | Nozzle temperature | Bed temperature | Print speed | Fan | Enclosed chamber | Drying before printing | Hardened steel nozzle | DensityISO 1183 | Tensile strengthISO 527-2 · Printed specimen, XY | Shore hardnessISO 868 | Elongation at breakISO 527-2 · Printed specimen | Diameter | Net weight | Standard colors | Uses |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TPU 95AGRN3D-TPU-F95 | 210–240 °C | 25–60 °C | 20–60 mm/s | 50–100 % | Not needed | Required: 50–60 °C / 6–8 h | Not needed; direct-drive extruder recommended | 1.18–1.24 g/cm³ | 25–45 MPa | 93–97A | 300–600 % | 1.75 mm | 1 kg | 1101 Black, 1001 White, 9001 Clear, 2001 Red | Protective cases, dampers | |
| TPU 90AGRN3D-TPU-F90 | 210–235 °C | 25–60 °C | 15–50 mm/s | 50–100 % | Not needed | Required: 50–60 °C / 6–8 h | Not needed; direct-drive extruder recommended | 1.15–1.22 g/cm³ | 20–40 MPa | 88–92A | 400–650 % | 1.75 mm | 1 kg | 1101 Black, 9001 Clear | Grips, seals | |
| TPU 85AGRN3D-TPU-F85 | 210–235 °C | 25–60 °C | 15–40 mm/s | 50–100 % | Not needed | Required: 50–60 °C / 6–8 h | Not needed; direct-drive extruder required | 1.15–1.22 g/cm³ | 20–35 MPa | 83–87A | 400–700 % | 1.75 mm | 0.5 kg / 1 kg | 1101 Black, 9001 Clear | Soft pads, soft grips | |
| TPU 64DGRN3D-TPU-F64D | 220–250 °C | 40–70 °C | 30–100 mm/s | 30–80 % | Not needed | Required: 60 °C / 6–8 h | Not needed | 1.18–1.24 g/cm³ | 35–55 MPa | 62–66D | — | 1.75 mm | 1 kg | 1101 Black, 1001 White | Wear parts, tires, corner guards |
GRN3D-TPU-F95
Flexible, wear resistant
GRN3D-TPU-F90
Softer, still easy to print
GRN3D-TPU-F85
Soft, good rebound
GRN3D-TPU-F64D
Semi-rigid, wear and impact resistant
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
Standard diameter 1.75 mm; 2.85 mm on request. Diameter tolerance ±0.03 mm (to be verified by GREENPOLYMER). Other colors available as OEM custom colors.
The number in the model code is the Shore A hardness; codes with D are Shore D hardness, such as GRN3D-TPU-F64D.
The lower the hardness, the softer the filament and the harder it is to feed. 85A needs a direct-drive extruder; a direct-drive extruder is recommended for 90A and 95A.
Print flexible materials slowly, with short or no retraction.
TPU strings and bubbles easily when damp; it must be dried before printing.
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.