Filament comparison
How to use: first choose a material by heat resistance and flexibility, then check whether an enclosed chamber, a hardened steel nozzle and mandatory drying are needed.
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
PLA Basic
GRN3D-PLA-S01 · Appearance
HDT / heat (typical) HDT 50–60 °C
Tensile strength (XY) 40–60 MPa
- Enclosed chamber
- Not needed
- Hardened nozzle
- Not needed
- Dry before printing
- Recommended
| Code | Name | HDT / heat (typical) | Tensile strength (XY) | Enclosed chamber | Hardened nozzle | Dry before printing | Status |
|---|---|---|---|---|---|---|---|
| Appearance8 | |||||||
| GRN3D-PLA-S01 | PLA Basic Appearance | HDT 50–60 °C | 40–60 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-M01 | PLA Matte Appearance | HDT 50–58 °C | 30–45 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-K01 | PLA Silk Appearance | HDT 50–58 °C | 30–45 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-B01 | PLA Marble Appearance | HDT 50–58 °C | 30–45 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-W01 | PLA Wood Appearance | HDT 50–58 °C | 20–40 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-D01 | PLA Gradient Appearance | HDT 50–58 °C | 35–55 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-N01 | PLA Glow-in-the-Dark Appearance | HDT 50–58 °C | 30–45 MPa | Not needed | Recommended | Recommended | Available |
| GRN3D-PLA-P01 | PLA Sparkle Appearance | HDT 50–58 °C | 30–45 MPa | Not needed | Not needed | Recommended | Available |
| Everyday Functional7 | |||||||
| GRN3D-PLA-H01 | PLA High Speed Everyday Functional | HDT 52–58 °C | 40–55 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-T01 | PLA Toughened Everyday Functional | HDT 52–60 °C | 40–55 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PLA-L01 | PLA Lightweight Everyday Functional | — | 15–30 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PETG-S01 | PETG Basic Everyday Functional | HDT 65–75 °C | 40–55 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-PETG-H01 | PETG High Speed Everyday Functional | HDT 65–72 °C | 40–55 MPa | Not needed | Not needed | Recommended | Available |
| GRN3D-ABS-E01 | ABS Everyday Functional | HDT 85–100 °C | 30–45 MPa | Recommended | Not needed | Recommended | Available |
| GRN3D-ASA-S01 | ASA Basic Everyday Functional | HDT 90–100 °C | 35–50 MPa | Recommended | Not needed | Recommended | Available |
| Engineering13 | |||||||
| GRN3D-PLA-C10 | PLA-CF10 Engineering | HDT 55–65 °C | 35–55 MPa | Not needed | Required | Recommended | Available |
| GRN3D-PETG-C01 | PETG-CF Engineering | HDT 70–80 °C | 45–60 MPa | Not needed | Required | Recommended | Available |
| GRN3D-PET-C15 | PET-CF15 Engineering | HDT 80–120 °C (unannealed) | 60–90 MPa | Recommended | Required | Required | Available |
| GRN3D-PC-E01 | PC Engineering | HDT 115–135 °C | 55–70 MPa | Recommended | Not needed | Required | Available |
| GRN3D-PCA-E01 | PC/ABS Engineering | HDT 100–115 °C | 40–55 MPa | Recommended | Not needed | Recommended | Available |
| GRN3D-PC-X01 | PC Flame Retardant Engineering | — | 55–65 MPa | Recommended | Not needed | Required | Available |
| GRN3D-PA6-E01 | PA6 Engineering | — | 40–70 MPa (dry) | Recommended | Not needed | Required | Available |
| GRN3D-PA6-C20 | PA6-CF20 Engineering | HDT 120–190 °C (dry) | 60–100 MPa (dry) | Recommended | Required | Required | Available |
| GRN3D-PA6-G25 | PA6-GF25 Engineering | HDT 150–200 °C (dry) | 70–110 MPa (dry) | Recommended | Required | Required | Available |
| GRN3D-PA12-C10 | PA12-CF10 Engineering | HDT 120–160 °C | 50–80 MPa | Recommended | Required | Required | Available |
| GRN3D-PPS-C10 | PPS-CF10 Engineering | Planned, parameters to be verified by GREENPOLYMER | — | — | Required | — | Planned |
| GRN3D-PEEK-E01 | PEEK Engineering | Planned, parameters to be verified by GREENPOLYMER | — | — | — | — | Planned |
| GRN3D-PEKK-E01 | PEKK Engineering | Planned, parameters to be verified by GREENPOLYMER | — | — | — | — | Planned |
| Flexible4 | |||||||
| GRN3D-TPU-F95 | TPU 95A Flexible | — | 25–45 MPa | Not needed | Not needed | Required | Available |
| GRN3D-TPU-F90 | TPU 90A Flexible | — | 20–40 MPa | Not needed | Not needed | Required | Available |
| GRN3D-TPU-F85 | TPU 85A Flexible | — | 20–35 MPa | Not needed | Not needed | Required | Available |
| GRN3D-TPU-F64D | TPU 64D Flexible | — | 35–55 MPa | Not needed | Not needed | Required | Available |
| Support5 | |||||||
| GRN3D-PVA-S01 | PVA Soluble Support Support | — | — | Not needed | Not needed | Required | Available |
| GRN3D-BVOH-S01 | BVOH Soluble Support Support | — | — | Not needed | Not needed | Required | Available |
| GRN3D-BRK-01 | Breakaway Support for PLA/PETG Support | — | — | Not needed | Not needed | Recommended | Available |
| GRN3D-BRK-02 | Breakaway Support for ABS/ASA Support | — | — | Recommended | Not needed | Recommended | Available |
| GRN3D-BRK-03 | Breakaway Support for PA/PET Support | — | — | Recommended | Not needed | Required | Available |
No product meets all of these filters.
HDT is usually tested to ISO 75 at 0.45 MPa; results for printed parts depend on print orientation, infill and annealing.
Quick selection
- Display models, many colors
- GRN3D-PLA-S01, GRN3D-PLA-M01, GRN3D-PLA-K01
- Fast batch printing
- GRN3D-PLA-H01, GRN3D-PETG-H01
- Snap fits, bending parts
- GRN3D-PLA-T01, GRN3D-PETG-S01
- Outdoor parts
- GRN3D-ASA-S01, GRN3D-PA12-C10
- Heat resistance 80–100 °C
- GRN3D-ABS-E01, GRN3D-ASA-S01, GRN3D-PCA-E01
- Heat resistance above 100 °C
- GRN3D-PC-E01, GRN3D-PET-C15, GRN3D-PA6-C20, GRN3D-PA6-G25
- Stiff structural parts
- GRN3D-PLA-C10, GRN3D-PETG-C01, GRN3D-PA6-C20
- Flexible parts
- GRN3D-TPU-F95, GRN3D-TPU-F90, GRN3D-TPU-F85
- Semi-rigid wear parts
- GRN3D-TPU-F64D, GRN3D-PA6-E01
- Internal cavity supports
- GRN3D-PVA-S01, GRN3D-BVOH-S01
Selection and services
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.