Photopolymer resin
GRN3D-RSN-S01
- Brand GRN3D
- GREENPOLYMER 3D printing material
- Material RSN
- Photopolymer resin
- Descriptor S
- Basic
- Sequence 01
- Model 01
GREENPOLYMER Standard Photopolymer Resin
Fine detail.
Typical values. Refer to the actual TDS.
A spindle turns in the liquid at a held temperature; the torque gives the viscosity
Printing and post-processing
Typical values. Refer to the actual TDS.
- Light source
- 405 nm (some 385 nm)
- Recommended layer height
- 0.025–0.1 mm
- Post-processing
- Wash in alcohol, then post-cure
Typical properties
Typical values. Refer to the actual TDS.
| Property | Typical value | Test standard |
|---|---|---|
| An illustration, not a measurement: A dumbbell specimen is pulled at a constant speed and the stress–strain curve is recorded until it breaksAfter post-cure | 30–55 MPa | ASTM D638 |
| An illustration, not a measurement: A spring-loaded indenter presses into the specimen; the depth gives the reading | 75–85 D | ASTM D2240 |
| An illustration, not a measurement: A spindle turns in the liquid at a held temperature; the torque gives the viscosity25 °C | 150–400 mPa·s | — |
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
A dumbbell specimen is pulled at a constant speed and the stress–strain curve is recorded until it breaks
Specifications and documents
- Net weight
- 0.5 kg / 1 kg bottles
- Colors
Color codes follow the GREENPOLYMER color list; contact us for custom colors.
- TDS / SDS
Need the TDS / SDS (Chinese or English)? Email hello@greenpolymer.com with the product code.
- Material
- Related industries
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.